Description

Cablesys manufacturers data center grade fiber optic MTP® patch cords. The 50 micron MTP fiber optic patch cable is constructed with Corning® Clearcurve® OM3 glass. The MTP multimode fiber optic cable comes with 40G Base-SR4 8-fiber configuration for direct equipment to equipment connection to support laser optimized multimode fiber LOMMF and high speed 10G and 40G cabling networks. The high density 8 fiber cable is OM3 50/125 with a 3.0mm diameter. These OM3 fiber jumper cables have a configuration of 50 125. The aqua jacket material is optical fiber nonconductive plenum OFNP and is colored aqua for 10Gb and 40Gb networking. The MTP-MTP fiber optical cord is assembled with MTP female connectors. The MTP connector uses a spring loaded sliding mechanism allowing the fiber patch cord to latch onto adapters providing a secure and reliable connection for network cabling in data center environments, colocation facilities, server farms, cloud storage networks, and telecommunication rooms. Each assembly is 100% factory tested to meet Bellcore GR-326 and TIA standard with maximum insertion loss at less than 0.75dB, 0.5dB is typical. Operating temperature is between -40C to +70C. Minimum bend radius for these fiber optic patch cables is 1.18 inch. Cablesys MTP fiber jumpers are RoHS compliant and comply with IEEE 802.3, IEC-61754-7 and TIA-604-5 type MPO standards. Each fiber optic jumper cable is factory built and tested. MTP connectors are compatible with MPO adapter panels and cassettes.

MTP® is a registered trademark of US Conec Ltd. ClearCurve^® is a registered trademark of Corning®.

Extra Information

Mode:

OM3/MM

Connector:

MTP

Fiber Count:

Cable Rating:

Plenum Rated OFNP

Cable Diameter:

3.0 mm

Packaging:

Single

RoHS:

Compliant

Country of Origin:

China

Feature 1:

Cablesys MTP patch cable, also known as MTP patch cord, supports 8 fibers, Type B polarity (channel 1 to channel 12), and comes in a female version, without guide pins

Feature 2:

The MTP patch cable is designed to achieve higher speeds and density in the network, support long-range backbone cabling, and reduce cabling congestion by consolidating 8 OM3 multimode fiber strands into a single jacket

Feature 3:

Cablesys MTP cable is performance tested to exceed TIA industry standards with less than 0.75dB insertion loss, 0.5dB is typical

Feature 4:

Cablesys MTP cable is bend-insensitive, supporting a 1.18 inch minimum bend radius which helps reduce optical loss in tight bends

Feature 5:

The MTP-MTP patch cable is 100% factory terminated using high-performance machine polishing, 3D metrology testing to ensure a high-quality connector, and high-power scopes to eliminate contaminants