Ethernet: A Private College Installed CAT6A Pre-terminated Patch Panels
Posted by Cablesys on Feb 14th 2020
A private college upgraded its cabling system using
Cablesys’ Pre-terminated Patch Panel Solution. The system required 10G Ethernet
bandwidth, so they chose Category 6A (CAT6) performance.
Cablesys built twelve 24-Port CAT6A
patch panels
pre-terminated with UTP cables that extended twenty-five feet
to allow them to connect between racks. The system was pre-tested to TIA®
performance standards before shipping. Once the materials were received, they
screwed the bracket panels onto th...
read more
Ethernet+Fiber: Software Company Installs Pre-terminated Patch Panels
Posted by Cablesys on Nov 6th 2019
A healthcare communication software company upgraded its network to 10G using Cablesys’ DIY Pre-terminated Patch Panel Solution.
The company
required two cabling systems; CAT6A and fiber optic. Cablesys built
twenty-three 24-port CAT6A patch panels pre-terminated with UTP cables in
various lengths. Plus, four 96-port LC-to-LC fiber optic patch panels
pre-terminated with OM3 cables. Both systems were pre-tested to TIA performance
standards and shipped as a kit.Once their IT staff received...
read more
Ethernet: Equipment Fabricator Installs CAT6A Pre-terminated Patch Panels
Posted by Cablesys on Sep 20th 2019
An equipment
fabricator based out of Buffalo, New York, upgraded their network to 10G using
Cablesys’ Pre-terminated Patch Panel Solution. They chose the Category 6A
(CAT6A) FTP patch panel system that is factory tested to provide up to 7dB
performance headroom at 550MHz. They installed two 24-Port CAT6A patch panels
with 25 feet cable assemblies. The materials came as a kit and included four
cable assemblies with bezels, two bracket panels, and two cable management
bars.To learn more,...
read more
Ethernet: Electrical Contractor Installs Pre-terminated Patch Panel System
Posted by Cablesys on Jul 10th 2019
An electrical contractor located in Lebanon, Connecticut,
wanted to connect computers and network equipment for their servers. However,
there were no data outlets in the area. To resolve the issue, they installed
Cablesys’ Pre-terminated Patch Panel System with mobile box.
The mobile
box
offers a temporary way to provide connectivity in an open environment.
It is made with sturdy ABS plastic to withstand harsh environments. Cablesys
built four boxes, each with six Category 6 data p...
read more
Ethernet: IT Company Installs Pre-terminated Patch Panel System
Posted by Cablesys on May 24th 2019
An IT consulting and web development company located in
Longview, Texas, planned to expand its cabling system. They wanted to add a 24
port patch panel and plug the cables from the rear to a 24 port network switch.
Cablesys built them a patch panel pre-terminated with patch
cables on the rear that extended fifty feet. Once the IT company's staff
received the materials, all they had to do was screw the bracket panel onto the
rack, snap in the connectivity, route the cables, and plug in...
read more