CAT6 Slim Ethernet Patch Cord with Clear Boot Strain Relief, RJ45, Stranded, 250 MHz, UTP, Pure Bare Copper Wire, 28 AWG, LAN Network Patch Cable

Cablesys Category 6 Unshielded Twisted Pair (UTP) patch cords are made to fit in areas with tight spaces. The diameter of the Slim Patch Cable is 36% thinner than standard CAT6 networking cables. They are designed for patching or connecting to network adapters, switches, routers, access points, VoIP phones, DSL/cable modems, patch panels, work area outlets, and other computer devices that are equipped with an Ethernet Local Area Network (LAN), Wide Area Network (WAN) or an RJ-45 enabled port. Cablesys CAT6 patch cables are available in six colors: black, blue, gray, green, white, and yellow. Available lengths include 1 foot, 2 feet, 3 feet, 4 feet, 5 feet, 6 feet, 7 feet, 10 feet, 15 feet, 20 feet, and 25 feet.

Cablesys CAT6 patch cables are made from a 28 AWG stranded bare copper conductors consisting of a RJ-45-to-RJ-45 (8-position and 8-contacts). CAT 6 Ethernet RJ45 patch cables are wired to T568B and the data performance complied with ANSI/TIA-568.2-D C6 channel supporting 1000Base-T Ethernet network applications. Cablesys Category 6 Ethernet patch cords comply with standards and independent testing organizations such as UL, RoHS and exceed the requirements of ANSI/TIA Category 6 standards for balanced twisted pair and telecommunications cabling. This patch cable does not meet the recommend conductor size, 22~26awg, requirement of ANSI/TIA-568-C. Attenuation is increased due to the smaller 28awg conductors. Clear snagless boots include the benefit of standard strain relief with providing a uniform look with the modular plug. Patch cords come individually packaged, one piece per bag.